Brake calipers are vital to a car's stopping ability and are arguably one of the most important automotive braking components. Most cars today have disc brakes anyway, at least for the front wheels. However, many cars and trucks now use disc brakes on the rear as well. In a disc brake system, the wheels of a car are fixed to metal discs, or rotors, that rotate with the wheels. The job of the caliper is to slow the wheel down by creating friction with the rotor.
The brake caliper fits over the rotor like a clamp. Inside each caliper is a pair of metal plates bonded to a friction material - these are called brake pads. The outboard brake pads are on the outside of the rotor (facing outward) and the inboard brake pads are on the inside (facing toward the vehicle). When you apply the brakes, hydraulic pressure is created from the brake fluid in the master cylinder to one or more pistons in the brake caliper, forcing the brake pads against the rotor. The brake pads have a high-friction surface that slows the rotor down or even stops it completely. When the rotor slows or stops, the wheel slows or stops too, because they are connected to each other.
Older cars and trucks use drum brakes, which slow the movement of the wheels through friction between a rotating drum and the brake shoes housed within the drum. This friction causes heat and gases to build up inside the drum, which often results in a loss of braking power, known as brake fade. Because the brake pads in a disc brake system are outside the disc brake system rather than inside the drum, they are easier to ventilate and heat does not build up as quickly. For this reason, drum brakes have been largely replaced by disc brakes on modern cars; however, some less expensive cars still use drum brakes on the rear wheels, which do not require as much braking power.
There are two main types of calipers: floating (or sliding) calipers and fixed calipers. Floating calipers move in and out relative to the rotor and have one or two pistons only on the inside of the rotor. This piston pushes across the caliper when the brakes are applied, creating friction from the brake pads on both sides of the rotor. Fixed calipers, as the name implies, do not move, but have pistons arranged on opposite sides of the rotor. Fixed calipers are generally preferred due to their performance, but are more expensive than floating calipers. Some high-performance fixed calipers have two or more pairs of pistons arranged on each side of the rotor - some have as many as six pairs.


