Front Disc Brake Caliper For Benz 18-B5088

Designed and manufactured strictly in accordance with OEM standards, ensuring that braking performance and durability fully match the original quality. The tolerance of each component is controlled within ± 0.01mm precision machining level.

1) The metal substrate is treated with zinc chromate hexavalent passivation, and has passed 480 hours of salt spray testing, far exceeding industry standards;
2) Reinforced EPDM rubber seal ring can withstand the extreme temperature of -40 ℃ to 150 ℃, and the anti-aging index increases by 35%;
3) The original factory grade stainless steel piston component has undergone mirror polishing treatment on the surface, reducing the friction coefficient to 0.12 μ.
Intelligent braking force distribution: Using fluid dynamics simulation designed brake fluid channels, combined with a progressive pressure release structure, the brake pedal stroke is reduced by 15%, and the linear braking efficiency is improved by 22%.
Full process quality assurance: Each set of calipers has passed 3D laser scanning inspection, 25MPa hydraulic cycle testing, and 72 hour dynamic fatigue testing. Qualified products are packed with nitrogen filled anti-oxidation packaging and come with an AS3800 certified installation manual.

Compatible with the original ABS/ESP system, pre installed anti shake bracket socket, providing E-mark certified connector kit, supporting OE diagnostic system plug and play, saving installation time by more than 40%.